Lovepedal Eternity Burst
Posted Sun, 2010-11-07 16:43 by Harold
Project description
This is the Lovepedal Eternity Burst edition based on this schematic.
The 2 diodes are either 2 1N914 in series and 1 1N914 in the other direction, 2 pairs of 1N914's or 2 pairs of 1N914 and 1N34's in series. Your choice!
Bill of materials
| Resistors | |
|---|---|
| R1: 1M | |
| R2: 3.3K | |
| R3: 20K | |
| R4: 1K | |
| R5: 1K | |
| R6: 330R | |
| R7: 330R | |
| R8: 10K | |
| R9: 10K | |
| R10: 1M | |
| Potentiometers | |
|---|---|
| R11: 500K Log (A) | |
| R12: 5K Linear (B) | |
| R13: 500K Linear (B) | |
| Capacitors | |
|---|---|
| C1: 47nF | |
| C2: 100nF | |
| C3: 47pF | |
| C4: 150nF | |
| C5: 220nF | |
| Electrolytes | |
|---|---|
| C6: 10μF | |
| C7: 47μF | |
| C8: 47μF | |
| DIL IC's | |
|---|---|
| IC1: LM1458N | |
| Diodes | |
|---|---|
| D1: 1N914 | |
| D2: 1N914 | |
| 5 jumper wires |
| 11 trace cuts |
List
Click here to see the bill-of-materials as a list or download it as a comma separated values file (.csv).
Code
BB Forum code
HTML code
Comments
DONE
Submitted on March 25th, 2012 by AnonymousHi. I've just finished two of these pedals, the one for me and the other for a friend of mine. Your project works and the pedal sounds VERY nice! Thank you so much for sharing. BTW: I used two pairs 1N914 diodes. This is a Tube Screamer with the attributes.
[IMG]http://i242.photobucket.com/albums/ff176/pm7300/02-1.jpg[/IMG]
NICE!
Submitted on December 29th, 2011 by AnonymousI built this one today. It was the third pedal I've built. No problems with it and it sounds great. Has an 808 sound but more open and imo it sounds better.
What diode configuration did
Submitted on March 7th, 2012 by AnonymousWhat diode configuration did you use?